Temperature cycling for thermostats
Temperature cycling test bench for thermostats/temperature sensors. Cycling test bench checks heating or cooling ramps
Products tested
Sector of activity
Main functions
The bench allows simultaneous control of heating and cooling ramps of 10 mechanical thermostats. It allows to make series of cycles programmable by PC.
The switching temperature of the thermostats is automatically indicated on both the up and down sides for each thermostat.
The switching values of the thermostats are archived in the form of a table that can be used in Excel.
A display shows the temperature slopes and the status of each thermostat, as well as a table of the recorded switching values.
- Stainless steel frame
- Closed loop pressurised hydraulic system
- Integrated heating and cooling
- Programmable tests
- PC control
Adavntages of ThermoSwitch
Closed-loop circuit
Closed loop hydraulic system with a small volume of water (3 L) that optimises thermal and electrical inertia.
Archiving results
Automatic saving of results to an Excel table.
Configurable range
The operating range can be set for each of the thermostats tested.
Stainless steel frame
The hydraulic system and the stainless steel frame ensure good corrosion resistance of the machine.
TECHNICAL SPECIFICATIONS of the Temperature Cycling Test Bench for Thermostats
Specifications | ThermoSwitch |
Features of the device | |
Heating power | 2 000 W |
Cooling power | 1 900 W |
Power supply | 230 VAC / 50hz |
Electrical power | 3 KW |
Minimum temperature | 16°C |
Maximum temperature | 95°C |
Minimum ramp | 0,5°C/mn |
Maximum ramp | 4°C/mn |
Temperature accuracy | ± 0,3° C |
Dimensions of a workstation | |
Width | 1 550 mm |
Depth | 800 mm |
Height | 1 530 mm |
Weight | 200 kg |
Surface finish | Finition inox |
Customer applications
Would you like to find out more about hydraulic test benches?
Find out everything you need to know and much more!
COMPLEMENTARY SOLUTIONS
Discover our complementary hydraulic test benches for a complete and precise test
