1 kN Traction / compression machine
- Compact, easy-to-transport machine
- Ergonomics thanks to simple manual control for rapid testing
- Single-column machine for easy product access
- PC link for additional test functions (touch-screen compatible)
Products tested
Sector of activity
Main functions
The 1 kN tension/compression machine is a compact unit for characterizing the tensile and compressive behavior of small products. Automatic functions for tensile-compression tests :
- High-speed approach and automatic contact detection
- Speed-controlled compression or tension test
- Force stop or position
- Test cycling
Operating mode
- High-speed automatic feed until automatic contact detection
- Automatic compression/traction loading cycle(s) based on configurable program sheets
- Automatic report editing
1 kN Tensile Compression Machine
The 1 kN tensile-compression machine is a compact device for characterizing the tensile and compressive behavior of small products.
Single-column traction-compression machine
The single-column machine provides easy access to the product.
Compact compression tensile testing machine
Small, easily transportable machine.
Ergonomics – Compression tensile testing machine
Simple manual control for rapid testing.
Test specimens for tensile-compression testing machine
Standardised specimens for all types of material.
Advantages of the 1 kN Tensile Compression Testing Machine
Springs
Characterization of the elasticity of elastic systems with hysteresis measurement.
Aerosol sprays
A wide range of small products can be tested.
PC link
Can be connected to a PC to access additional test functions (touch-screen compatible).
TECHNICAL CHARACTERISTICS of the Traction Compression Machine 1 kN
Specifications | MMTC |
Characteristics of the appliance | |
Force | 1 000 N |
Race | 500 mm |
Speed | 50 mm/s |
Power supply | 230 VAC |
Dimensions | |
Height | 880 mm |
Width | 320 mm |
Depth | 310 mm |
Weight | ≈ 40 kg |
OPTIONS
Enceinte thermique
Built directly into the test bench, the thermal chambers are capable of simulating extreme environments (from -180°C to +600°C) and are reproducible. The temperature is regulated and controlled during the test according to pre-set parameters (ramps and steps). Thermal chambers are ideal for carrying out long-term tests or for preparing a sample prior to testing. The independent chamber is heated using a gas or liquid bath, with a temperature gauge positioned as close as possible to the sample under test. Robotic rapid transfer systems minimise variations in product temperature between the climatic chamber and the test area.
Logiciel d’analyse et de rapport automatique
The automatic analysis and reporting software allows each test function to be analysed from the measurement files according to various standards, curves and numerical results to be displayed and an automatic test report to be produced.
Customer applications
Would you like to find out more about mechanical test benches? Find out everything you need to know and much more!
Electrical cable tensile testing machine
Electrical cable tensile testing machine Measures tensile strength of cables up to 20 metres long. Also carries out elongation tests.
COMPLEMENTARY SOLUTIONS
Explore our complementary products to get the most out of your Traction Compression machine! Discover innovative solutions to further enrich your experience and optimize your results.
