2,000 kN Compression Tension Bench
- Ease of installation with adjustable automatic height brackets.
- The operator is protected by a reinforced sliding cover if the product breaks.
- The speed is regulated according to configurable cycles.
- Ergonomics thanks to a sliding control panel, always close to the test area.
Products tested
Sector of activity
Main functions
The hydraulic traction/compression test bench allows to carry out tensile and compression tests for products of high length (extension 3,000 mm) and high resistance (max. force 2,000 kN) at a regulated and servo-controlled speed.
The installation of the tested product is easy thanks to the automatic adjustment of the supports height and to the large retraction system of the sliding protective cover.
The bench is equipped with a protective sliding cover which protects the user in case of projections when the sample breaks.
Operating mode
- Automatic adjustment of the supports height according to the dimensions of the product to be tested
- High-speed automatic feed until automatic contact detection
- Automatic compression/traction loading cycle(s) based on configurable program sheets
- Automatic report editing
2,000 kN Traction / compression bench
The hydraulic Traction / compression bench enables tensile and compression tests to be carried out on long (3000 mm stroke), high-strength products at a controlled, servo-driven speed.
absorbers
We can test all types of shock absorbers (hydraulic, motorbike, undercarriage, etc.).
Operator safety
The operator is protected by a reinforced sliding bonnet.
Electrical cables
Testing the tensile/compressive strength of electrical cables.
hydraulic cylinders.
Characterisation of the force/displacement performance of hydraulic cylinders.
Benefits of the 2,000 kN Traction / compression bench
Easy to install
Easy installation with automated height-adjustable jibs.
Ergonomics
Sliding control panel, always close to the test area.
Regulated speed
Speed is regulated according to configurable cycles.
TECHNICAL SPECIFICATIONS of the2 000 kN Traction / compression bench
Specifications | MBTC |
Max. compressive force (rod output) | 2 000 kN |
Max. tensile force (cylinder section limit) | 1 460 kN |
Max. tensile force (sensor limit) | 1 300 kN |
Ø vérin | 300 mm |
- Useful cross-section in compression | 706 cm² |
Ø shaft | 160 mm |
- Stem section | 201 cm² |
- Useful cross-section in traction | 505 cm² |
Race | 3 000 mm |
Pump displacement | 45 cc |
Rated flow at 1,500 rpm | 68 l/min |
Max. flow at 1700 rpm | 77 l/min |
Max. compression pressure | 290 bar |
Max. tensile pressure (1,300 kN) | 257 bar |
Max. speed at full load with 65% efficiency | ≈ 4 mm/s (240 mm/min) |
Max. no-load speed | 1 100 mm/min |
Engine power at 1500 rpm | 11 kW |
Customer applications
Would you like to find out more about mechanical test benches? Find out everything you need to know and much more!
Electrical cable tensile testing machine
Electrical cable tensile testing machine Measures tensile strength of cables up to 20 metres long. Also carries out elongation tests.
Safety strap traction bench
Aircraft webbing test bench. Tensile test to test the resistance of straps to tearing up to 1,820 daN.
ADDITIONAL SOLUTIONS
Explore our complementary products to get the most out of your Compression Traction Bench!Discover innovative solutions to enhance your experience and optimize your results.
