Mechanical Test Bench ▸ Tensile / Compression test ▸ 800kN Horizontal Traction Bench

MBTH

800kN Horizontal Traction Bench

High precision thanks to a monoblock specimen holder equipped with an automatic centering device
Quick release (less than 5 seconds) between placement and breakage of the specimen
Total operator safety thanks to redundant security systems
Motorized arm to ensure precise positioning and on-the-fly hooking after the test

+33 2 52 56 04 20

Request a quote

TESTED STANDARD

NF, EN, ASSE, NHS

Max. speed

<40 mm/s

max. force

800 kN

Pressure measurement

± 0.01 bar

Products tested

Sector of activity

Main functions

Impact resistance is one of the most important properties to consider when designing a part or appliance. The impact pendulum test machine is used to determine the impact strength of a sample against a shock applied to it in accordance with ASTM and ISO standards. Impact pendulum test machines perform precise and repeatable impacts on a wide range of materials to determine the mechanical and physical characteristics of metals, polymers, composites, whether for R & D or quality control in production. Our machines carry out Charpy and Izod tests, which meet international standards. Our machines perform Charpy and Izod tests, which meet international standards.

an air and/or water tightness test
the setting of mixed water temperature and flow rate
the measurement of the mixed water temperature in full hot position
sealing measurement
measurement of antiscald and hysteresis

Operating mode

The automatic specimen centering system ensures a simple and effective use of the impact pendulum. The specimens are impacted within 5 seconds following their removal from the temperature unit. The use is simplified thanks to the rapid change of the knife and specimens supports.

The motorized impact pendulum is equipped with a pneumatic hammer release system. The hammer resetting process is motorized for a better ease of use. A protective casing protects the operators during the displacement of the hammer.

Bench developed to meet these standards:

NF EN 10045-1

NF EN 10045-2

See all standards

banc-traction-câble-vue-globale-LF Techologies

cable-pulling-bench-global-view-LF Techologies

Banc de Traction de Câble 800Kn Horizontale – LF Technologies

800Kn Horizontal Cable Puller - LF Technologies

Banc de Traction Horizontal de Câble 800Kn – LF Technologies

800Kn Horizontal Cable Puller - LF Technologies

Banc de Traction de Câble 800Kn – LF Technologies

800Kn Cable Pulling Bench - LF Technologies

banc-traction-câble-vue-rapprochée – LF Technologies

cable-pulling-bench-close-up-view - LF Technologies

Impact pendulum – Impact Charpy, Izod

Pendulum impact tester allowing to carry out tests on standardised specimens for Charpy and Izod impacts, according to the NF EN 10045-1 standard.

Advantages of the 800kN Horizontal Traction Bench

High-precision support

High precision thanks to a monoblock specimen holder equipped with an automatic centering device

Safety in use

Total operator safety thanks to redundant security systems

A motorized arm

Motorized arm to ensure precise positioning and on-the-fly hooking after the test

Shock test tubes

Standardized Charpy and Izod impact testers for all materials.

Quick release

Less than 5 seconds between insertion and breakage.

TECHNICAL SPECIFICATIONS of the 800 kN Horizontal Tension Bench

Spécifications	MCMP 300	MCMP 450	MCMP 600
Caractéristiques de l'appareil
Energie disponible (pneumatique, électrique et hydraulique)	300 J	450 J	600 J
Vitesse réglable	jusqu’à 6 m/s	jusqu’à 6 m/s	jusqu’à 6 m/s
Résolution mesure d’énergie	0,02 J	0,02 J	0,03 J
Pilotage par PC
Gestion des essais :	- Calcul - Archivage des résultats	- Calcul - Archivage des résultats	- Calcul - Archivage des résultats
Accrochage auto. du pendule par bras motorisé dynamique
Double système d’accrochage
Système de centrage auto. de l’éprouvette
Déclenchement auto. de l’essai par fermeture de la porte
Géométrie du couteau (selon norme ISO 148)
Largeur du couteau	< 18 mm	< 18 mm	< 18 mm
Angle du couteau	30° (± 1)	30° (± 1)	30° (± 1)
Rayon du couteau	2 mm (+ 0,5 - 0)	2 mm (+ 0,5 - 0)	2 mm (+ 0,5 - 0)
Géométrie des appuis (selon norme ISO 148)
Distance entre appuis	40 mm (+ 0,5 - 0)	40 mm (+ 0,5 - 0)	40 mm (+ 0,5 - 0)
Rayon des appuis	1 mm (+ 0,5 - 0)	1 mm (+ 0,5 - 0)	1 mm (+ 0,5 - 0)
Dépouille des appuis	11° (± 1)	11° (± 1)	11° (± 1)
Dimensions
Hauteur	2 560 mm	2 560 mm	2 560 mm
Largeur	2 100 mm	2 100 mm	2 100 mm
Profondeur	800 mm	800 mm	800 mm
Poids	= 2 000 Kg	= 2 000 Kg	= 2 500 Kg

OPTIONS

les enceintes thermiques sont capables de simuler des environnements extrêmes

Enceinte-thermique

Built directly into the test bench, the thermal chambers are capable of simulating extreme environments (from -180°C to +600°C) and are reproducible. The temperature is regulated and controlled during the test according to pre-set parameters (ramps and steps). Thermal chambers are ideal for carrying out long-term tests or for preparing a sample prior to testing. The independent chamber is heated using a gas or liquid bath, with a temperature gauge positioned as close as possible to the sample under test. Robotic rapid transfer systems minimise variations in product temperature between the climatic chamber and the test area.

Customer applications

Discover LF Technologies’ expertise in traction test benches through our customer applications.

Voir l'application

Building

Electrical cable tensile testing machine

Electrical cable tensile testing machine Measures tensile strength of cables up to 20 metres long. Also carries out elongation tests.

See project

Voir l'application

Aeronautics

Safety strap traction bench

Aircraft webbing test bench. Tensile test to test the resistance of straps to tearing up to 1,820 daN.