Customer applications for the faucet sector
Discover our customers’ applications in the faucet sector. LF Technologies, expert in innovative solutions for precision valves.
Hydraulic performance bench for mixing valve
Hydraulic test bench for performance measurement, tests many products and has many applications.
Test bench for chrome plating on fittings and accessories
The chrome plating test bench on taps assesses the quality of the plating by simulating extreme environmental conditions to test its resistance to sudden temperature changes.
Heating cable test bench
Performance bench designed to test the compliance of heating cables with the NF EN 62395-1 standard.
Heating and cooling tests to assess thermal resistance.
Cycling pressure bench for hot water tanks
The Cyclic Pressure Bench is a pressure generator for performing test pressure and alternating pressure tests on large capacity pressure vessels.
Thermostat control bench
Temperature cycling test rig for thermostats/temperature sensors. Automatic recording of test results. It carries out tests in accordance with standard NF EN 257.
Pressure generation bench for pipelines
The pipe pressure test rig is a hydrostatic test rig designed to apply cyclic and static pressure. A dedicated circuit also allows the simulation of water hammer.
Static and cyclic pressure bench
Cyclic pressure test bench for static and alternating pressure leakage testing of fittings and shower accessories.
Thermal shock bench for pipes
A test bench that checks that the pipe is in good condition.
It ensures that there is no deterioration of the product.
Pressure/flow test bench
The test bench made by LF Technologies performs tests on pressure reducing valves in accordance with the NF EN 1567 standard.NF EN 1567.
Demonstration bench for taps
Demonstration bench used at a trade fair. Test several taps simultaneously on a carefully designed, attractive and intuitive bench.
High torque hot/cold endurance bench
Test bench for testing the endurance of valves subjected to operating cycles and adjustable temperature.
Hydraulic test bench for valve endurance | LF Technologies
Modular hydraulic test stand dedicated to endurance testing.
Flush tank test bench
This test bench carries out hydraulic characterisation tests on toilet cisterns to check compliance with standard NF EN 14055;
Valve leak test bench
Leak test bench for ball valves and valve extensions; Tests the airtightness and measures any leaks.
Zone-Valves endurance bench
Endurance bench designed to test the heating element of a zone valve. The bench can accommodate 20 stations simultaneously.
Pressure cycle test bench
Cyclic pressure test rig for simulating water hammer in pipes. Leakage testing by pressure drop or flow detection.
Pressure holding test bench
Pressure test on boiler circulator. Test bench for pressure resistance, leak test and crash test. Discover our case studies.
Loop test for valve pressure and heat shock
Closed-circuit test bench designed to test hydraulic valves for the energy and nuclear sectors. Loop test for valve pressure and heat shock
Pressure and temperature control circuit
Special production machine designed to test the resistance of seals to pressure and temperature. This circuit can be connected to a pre-existing hydraulic bench.
Thermostatic valve cartridge test bench
Designed for adjustment and control tests on thermostatic cartridges, this hydraulic test bench assesses tightness, antiscald, flow and temperature adjustment.
Cartridge adjustment bench in production
Sanitary fittings test bench for testing two thermostatic cartridges simultaneously.
Allows various measurements, antiscald tests, engraving of 38°C position, etc.
Endurance bench for 3-way valves and EC motors
Study and development of a test bench to test the endurance of a 3-way valve and pump equipped with an EC motor.
Endurance bench for cartridges for taps
Hydraulic test bench to test 6 mechanical mixing valve cartridges simultaneously and independently.
Pressure and marking test bench
Pressure test bench for ball valve bodies and valve extensions. Marks parts and identifies defective products.
Test bench for solenoid valves
Performance and endurance test bench for electronic solenoid valve control. Thermal cycling tests on cartridges and their components are also possible with this bench.
Pressure, burst, temperature bench
Design of a brake hose burst test bench. Hydraulic test for resistance to pressure, bursting and temperature. Carried out on 2 hoses at a time and in several stages.
Endurance bench for toilet flaps
This endurance bench tests the service life and fatigue strength of WC flaps according to NF D 12-207.
Cyclic pressure test bench
Discover the functionalities of the pressure cycling test bench, designed to test hot water tanks according to the NF EN 12897 standard.
They trust us
LF Technologies at the service of the valves and fittings industry
Valves and fittings, combining aesthetics and functionality, require precision engineering to ensure product quality and durability. LF Technologies, with its wealth of experience in the design and manufacture of special machines and test benches, is a partner of choice for companies in the valves sector seeking to optimize their production.
Precise solutions for flawless valves
The production of valves and related equipment requires meticulous attention at every stage. LF Technologies’ special machines and test benches guarantee rigorous testing and efficient production, ensuring that every part meets the highest standards of quality and performance. Whether testing for tightness, corrosion resistance or mechanical strength, LF Technologies provides the tools needed to produce valves that meet the expectations of the most demanding customers.