High Pressure, Burst and Temperature Test Bench for Hoses and Pipes
- Pressure resistance test bench
Products tested
Sector of activity
Main functions
The purpose of this test bench is to test the pressure resistance of hoses and pipes until they burst.
Operating mode
A low pressure lift pump sucks the liquid into a container. This liquid is delivered, via a valve, into a vertical chamber of small volume.
The upper part of the chamber is located inside the thermal enclosure. his chamber is equipped with a removable part receiving adaptor fittings to the lower part of the hose being tested.
The upper part of the tested hose is connected to a pilot valve, mounted on a vertical slide, allowing adaptation to the length of the hose being tested.
A pressure sensor, located on the body of the vertical chamber, enables measurement and transmission of pressure applied to the hose.
Cyclic pressure and burst test loop
High-pressure, burst and high-temperature test hoses
Sanitary piping – Hydraulic test benches
The product is tested until a leak or burst is detected;
Pumps and circulators
Tests can be performed at high pressure and high temperature until the sample bursts.
Plunger piston
Precision of the volumes of liquids injected thanks to a brushless technology motor.
Asvantages of Perf-HP
Advantage safety strike
The protective door locks in case of high pressure or temperature. The door is equipped with an enclosing grid to prevent possible shocks when hoses burst.
Hoses
The test loop performs tests on automotive brake hoses.
Advantage self controlled valve
Two height-adjustable, self-propelled flaps simplify the mounting of test equipment.
TECHNICAL CHARACTERISTICS of the High Pressure, Burst and High Temperature test bench
Specifications | Perf-HP |
Characteristics of the appliance | |
Max. pressure | 1 800 bar |
Accuracy of pressure measurement | ± 2 bar |
Pressure measurement resolution | 0,5 bar |
Minimum pressure ramp | 0,01 bar/s |
Maximum pressure rise ramp | 40 bar/s |
Precision of pressure control | ± 3 bar |
Type of liquid | Water, brake fluid... |
Noise level (excluding burst) | < 65 db |
Power supply | 380 VAC Tri |
Electrical power required | 7 kW |
Dimensions | |
Width | 680 mm |
Height | 2 240 mm |
Weight | 450 kg |
Depth | 780 mm |
Customer applications
Would you like to find out more about hydraulic test benches?
Find out everything you need to know and much more!
Pressure, burst, temperature bench
Design of a brake hose burst test bench. Hydraulic test for resistance to pressure, bursting and temperature. Carried out on 2 hoses at a time and in several stages.
COMPLEMENTARY SOLUTIONS
Would you like to find out more about hydraulic test benches?
Find out everything you need to know and much more!
